#include <FlashDrum.h>

Public Member Functions | |
FlashDrum (Libpf::User::Defaults defaults, uint32_t id=0, Persistency *persistency=nullptr, Persistent *parent=nullptr, Persistent *root=nullptr) | |
~FlashDrum (void) | |
void | calculate (int level=0) |
void | setup (void) |
performs initializations required immediately before solution More... | |
void | go (Calculatable::SolutionMode solutionMode, int level) |
void | setup_of (void) |
setup and resize appropriately internal vectors; must be provided by implementations More... | |
virtual const std::string & | type (void) const |
void | initializeNonPersistents (void) |
estimates hidden, non-persistent unknowns from the current results More... | |
Value | energyBalance (void) const |
return should-be net energy balance of unit (inlet-outlet), defaults to zero and must be overridden if required More... | |
![]() | |
Connectivity (Libpf::User::Defaults defaults, uint32_t id=0, Persistency *persistency=nullptr, Persistent *parent=nullptr, Persistent *root=nullptr) | |
~Connectivity (void) | |
void | attach (EdgeBase &edge, std::string &port) final |
void | detach (std::string port) final |
Detaches the edge from the port with name "port". More... | |
bool | check (void) |
void | calculateBalance (void) |
calculate cmdot, mdotin, mdotout, mdotcomps[] and cduty based on inlet/outlet streams More... | |
std::string | portInlet (int i) const |
std::string | portOutlet (int i) const |
bool | isInletConnected (int i) const |
bool | isOutletConnected (int i) const |
EdgeBase & | inlet (int i) |
EdgeBase & | outlet (int i) |
EdgeBase & | edgeFromPort (const std::string &port) |
void | printConnectivity (void) const |
diagnostic print More... | |
![]() | |
VertexBase (Libpf::User::Defaults defaults, uint32_t id=0, Persistency *persistency=nullptr, Persistent *parent=nullptr, Persistent *root=nullptr) | |
void | translate (std::string &port) |
translates port name from user-friendly synonyms into the canonical form, or leaves unchanged More... | |
virtual void | checkBalance (void) |
call calculateBalance, then issue error/warning if required More... | |
virtual Value | massBalance (void) const |
return should-be net mass balance of unit (inlet-outlet), defaults to zero and must be overridden if required More... | |
Category | category (void) const |
return model Category More... | |
void | printSvg (const char *fileName, bool tiny, bool raster, int offset) |
virtual PortLocation | locationFromPort (std::string port) const |
PortLocation | locationFromEdge (std::string edgeTag) const |
const std::string & | edgeFromPort (const std::string &port) const |
const std::string & | portFromEdge (const std::string &edgeTag) const |
![]() | |
Model (Libpf::User::Defaults defaults, uint32_t id, Persistency *persistency, Persistent *parent, Persistent *root) | |
bool | isPristine (void) const |
void | unSetInput (void) |
wipes out all tags marked as inputs More... | |
void | reportMessages (void) |
recursively collect status of all sub-objects and report to parent More... | |
void | resetErrors (void) |
void | setWarning (std::string s) |
send new warning message to local queue More... | |
void | setError (std::string s) |
send new error message to local queue More... | |
void | reportWarning (std::string s) |
propagate warning message from sub-object to local queue More... | |
void | reportError (std::string s) |
propagate error message from sub-object to local queue More... | |
void | setCalculated (void) |
increments nCalculations counter and unsets pristinity More... | |
void | setPristineRecursive (void) |
force next calculation to restart as if the model had never been calculated during this runtime session, also for all contained objects More... | |
void | setPristine (void) |
force next calculation to restart as if the model had never been calculated during this runtime session More... | |
void | setRunTime (double t) |
set the run time More... | |
void | stash (void) const |
void | applyStash (void) |
void | clearStash (void) const |
clear the store cache More... | |
virtual int | maximumIterations (void) |
returns default maximum iterations for main computation; defaults to 200 More... | |
std::ostream & | print (std::ostream &os, bool strings, bool quantities, bool integers, bool recursive) const |
std::ostream & | printFull (std::ostream &) const |
print the model quantities, including derivative info, in text format to os More... | |
void | printHtml (const char *dir) const |
void | printSvgAll (const char *dir, bool tiny, bool raster, int offset, std::vector< std::string > &list) |
Recursively output the model and all descendants in SVG format as separate id.SVG files in the directory dir. More... | |
virtual void | printXml (const char *dir, Model *precedingSibling, Model *followingSibling) const |
void | printXmlToc (std::ofstream &toc, int indent) const |
void | printOds (std::ofstream &ods) const |
![]() | |
Object (Libpf::User::Defaults defaults, uint32_t id=0, Persistency *persistency=nullptr, Persistent *parent=nullptr, Persistent *root=nullptr) | |
Libpf::User::Defaults | defaults (void) const |
void | readVariables (Persistency *persistency) |
reads Q, QV and QM from persistency More... | |
void | readParameters (Persistency *persistency) |
reads I, IV, S and SV from persistency More... | |
Node & | operator= (const Node &) |
copy assignment operator More... | |
Node & | operator= (Node &&other) |
move assignment More... | |
~Object (void) | |
const std::string & | type (void) const |
Object & | at (const std::string &fullRelativeTag) |
const Object & | at (const std::string &fullRelativeTag) const |
Object & | at (const std::string &fullRelativeTag, int index) |
const Value & | Q (const std::string &tag) const |
const Value & | Q (const std::string &tag, int index) const |
const Value & | Q (const std::string &tag, int row, int column) const |
Value & | Q (const std::string &tag) |
Value & | Q (const std::string &tag, int index) |
Value & | Q (const std::string &tag, int row, int column) |
const Value & | Q (const std::string &tag, std::string componentName) const |
Value & | Q (const std::string &tag, std::string componentName) |
const Value & | Q (const std::string &tag, int index, std::string componentName) const |
Value & | Q (const std::string &tag, int index, std::string componentName) |
const int & | I (const std::string &tag) const |
const int & | I (const std::string &tag, int index) const |
int & | I (const std::string &tag) |
int & | I (const std::string &tag, int index) |
const std::string & | S (const std::string &tag) const |
const std::string & | S (const std::string &tag, int index) const |
std::string & | S (const std::string &tag) |
std::string & | S (const std::string &tag, int index) |
bool | operator!= (const Object &rhs) const |
bool | operator== (const Object &rhs) const |
bool | compareParameters (const Object &rhs) const |
bool | existsI (const std::string &tag) const |
bool | existsS (const std::string &tag) const |
bool | existsQ (const std::string &tag) const |
const RangeQuantities | quantities (void) |
const ConstRangeQuantities | quantities (void) const |
![]() | |
Node (Libpf::User::Defaults defaults, uint32_t id=0, Persistency *persistency=nullptr, Persistent *parent=nullptr, Persistent *root=nullptr) | |
Node (const Node &other) | |
copy constructor More... | |
Node (Node &&other) | |
move constructor More... | |
virtual std::unique_ptr< Node > | clone (void) const |
~Node () | |
int | insert (Persistency *persistency) const |
int | update (Persistency *persistency) const |
void | restore (Persistency *persistency) |
void | remove (Persistency *persistency) const |
uint32_t | rootId (void) const |
uint32_t | range (void) const |
uint32_t | getId (void) |
returns the next available id and increments the internal counter More... | |
Node & | addChild (std::string type, uint32_t id, Persistency *persistency) |
Node & | addChild (std::string type, Libpf::User::Defaults defaults) |
Node & | addChild (const Node &child) |
Node & | addChild (std::unique_ptr< Node > child) |
std::unique_ptr< Node > | prune (const std::string &tag) |
const Node & | child (const std::string &tag) const |
Node & | at (const std::string &fullRelativeTag) |
const Node & | at (const std::string &fullRelativeTag) const |
uint32_t | descendants (void) const |
Persistent * | root (void) const |
void | renameChild (const std::string &oldName, const std::string &newName) |
bool | existsChild (std::string tag) const |
bool | exists (uint32_t id) |
Node & | search (uint32_t id) |
bool | operator!= (const Node &rhs) const |
bool | operator== (const Node &rhs) const |
bool | isRestored (void) const |
return whether the Node has just been retrieved from persistent storage More... | |
void | setIcon (std::string icon, double width, double height) |
bool | hasIcon (void) const |
std::string | iconName (bool raster) const |
double | iconWidth (void) const |
double | iconHeight (void) const |
const Range | children (void) |
const ConstRange | children (void) const |
![]() | |
Persistent (const std::string &tag, const std::string &description, Persistent *parent, uint32_t id) | |
main constructor More... | |
Persistent (const Persistent &) | |
copy constructor More... | |
Persistent & | operator= (const Persistent &) |
copy assignment More... | |
Persistent (Persistent &&other) | |
move constructor More... | |
Persistent & | operator= (Persistent &&other) |
move assignment More... | |
~Persistent (void) | |
uint32_t | id (void) const |
std::string | uuid (void) const |
uint32_t | parentId (void) const |
double | created_at (void) const |
double | updated_at (void) const |
void | updated_at (double u) const |
![]() | |
Item (const Item &other) | |
copy constructor copies all elements but parent which is set to nullptr More... | |
Item & | operator= (const Item &other) |
copy assignment operator copies all elements but parent which is set to nullptr More... | |
Item (const std::string &tag, const std::string &description, Persistent *parent) | |
Item (Item &&other) | |
move constructor More... | |
Item & | operator= (Item &&other) |
move assignment operator More... | |
virtual | ~Item (void) |
const std::string & | tag (void) const |
const std::string & | description (void) const |
std::string | fullTag (void) const |
const Persistent * | parent (void) const |
void | setTag (const std::string &tag) |
void | setDescription (const std::string &description) |
void | setWideTag (const std::wstring &tag) |
wide-character variant, More... | |
void | setWideDescription (const std::wstring &description) |
wide-character variant, More... | |
bool | operator!= (const Item &rhs) const |
bool | operator== (const Item &rhs) const |
![]() | |
Diagnostic (void) | |
void | setVerbosity (int verbosity) |
sets the verbosity level for this instance More... | |
int | verbosity (void) const |
![]() | |
Task (void) | |
~Task (void) | |
double | cost (void) const |
int | level (void) const |
int | core (void) const |
get the core where this task is scheduled or -1 if not yet scheduled More... | |
double | startTime (void) const |
return forecast start time More... | |
double | endTime (void) const |
return forecast end time More... | |
void | setLevel (int l) |
void | setCore (int c) |
double | setStartTime (double t) |
sets the start time and returns the end time More... | |
![]() | |
FlashDrumBase (Libpf::User::Defaults defaults, uint32_t id=0, Persistency *persistency=nullptr, Persistent *parent=nullptr, Persistent *root=nullptr) | |
~FlashDrumBase (void) | |
ObjectiveNleAd * | objectiveFunction (void) |
returns a pointer to the model's objective function More... | |
void | setup (void) |
performs initializations required immediately before solution More... | |
void | go (Calculatable::SolutionMode solutionMode, int level) |
int | calculateResidualsLocal (void) |
compute residuals and store into local vector y_; must be provided by implementations More... | |
void | setup_of (void) |
setup and resize appropriately internal vectors; must be provided by implementations More... | |
SolverNleInterface * | solver (void) |
const Stream * | internalStream (void) const |
![]() | |
ObjectiveNleAdVertex (std::string t) | |
constructor More... | |
void | unscalex (double *x) |
transforms back the vector of scaled variables x by applying the unscaling More... | |
int | calculateResiduals (std::vector< Value > &y, uint32_t offset) |
void | operator() (double *, double *, Jacobian *) |
implements the () operator by calling calculateResidualsLocal and calculateResiduals; overrides ObjectiveNleAd::operator() More... | |
![]() | |
ObjectiveNleAd (std::string t) | |
constructor More... | |
double | xmin (unsigned int i) |
return the lower bound on unknown i More... | |
double | xmax (unsigned int i) |
return the upper bound on unknown i More... | |
unsigned int | size (void) const |
returns the current size of the problem More... | |
void | scalex (double *x) |
transforms the vector of "real" variables x by applying the scaling More... | |
void | addUnknown (Value *x, Scaler scaler, const std::string &tag) |
void | changeUnknown (unsigned int i, Value *x, Scaler scaler, const std::string &tag) |
change the i-th unknown More... | |
void | addObjectiveFunction (ObjectiveNleAd &of) |
append the remote objective function More... | |
![]() | |
ObjectiveNleAuto (std::string t) | |
constructor More... | |
bool | init (double *x) |
void | setValue (unsigned int i, double x) |
copies the value for the i-th unknown from x in the Value pointed to, without altering the derivatives More... | |
void | copyresults (double *x) |
copies the unknown values from the x vector into the Values pointed to More... | |
void | inactivate (void) |
inactivates all unknowns More... | |
void | clearderivatives (void) |
clears the derivative information for all unknowns without setting to inactive More... | |
void | setActive (unsigned int i) |
activates the i-th unknown More... | |
void | operator() (double *, double *, Jacobian *J) |
implements the () operator by calling calculateResiduals; derived class may override it More... | |
void | setx (unsigned int i, Value &x) |
sets the i-th unknown to x More... | |
const Value & | unknown (unsigned int i) const |
returns a reference to the i-th unknown More... | |
const std::string & | unknownTag (unsigned int i) const |
returns a reference to the tag of the i-th unknown More... | |
double | xmin (unsigned int i) |
return the lower bound on unknown i More... | |
double | xmax (unsigned int i) |
return the upper bound on unknown i More... | |
void | print (void) const |
lists unknowns More... | |
const std::string & | tagof (void) const |
returns the tag of the instance More... | |
void | settagof (std::string t) |
sets the tag of the instance More... | |
void | appendtagof (const std::string &t) |
appends to the tag of the instance More... | |
int | zero_residuals (std::vector< Value > &y, uint32_t offset) |
void | addUnknown (Value *x, const std::string &tag) |
void | changeUnknown (unsigned int i, Value *x, const std::string &tag) |
change the i-th unknown More... | |
![]() | |
ObjectiveNleInterface (void) | |
Public Attributes | |
Quantity | Tavg |
Mass-weighted average inlet temperature. More... | |
![]() | |
Integer | nIn |
Number of connected inlet EdgeBases (non-persistent); should not be set directly: use attach instead. More... | |
Integer | nOut |
Number of connected outlet EdgeBases (non-persistent); should not be set directly: use attach instead. More... | |
Integer | maxNIn |
Maximum number of connected inlet EdgeBases. More... | |
Integer | maxNOut |
Maximum number of connected outlet EdgeBases. More... | |
String | constraints |
Used internally to persist connectivity constraints. More... | |
![]() | |
Quantity | cmdot |
Cumulative mass flow, inlet - outlet. More... | |
Quantity | mdotin |
inlet mass flow More... | |
Quantity | mdotout |
outlet mass flow More... | |
std::vector< Quantity > | mdotcomps |
Cumulative mass flow of each component, inlet - outlet. More... | |
Quantity | cduty |
Cumulative enthalpy flow, inlet - outlet. More... | |
![]() | |
Integer | nCalculations |
number of times the model has been calculated More... | |
StringVector | errors |
errors from the last computation More... | |
StringVector | warnings |
warnings from the last computation More... | |
![]() | |
int | weight |
for backTrack_ and findCycles More... | |
![]() | |
PhaseTotal | pin |
not persistent, used as temporary workspace More... | |
Quantity | T |
Temperature; fixed if Flash configuration is XT, otherwise used as starting value iff != 298.15. More... | |
Quantity | P |
Pressure; fixed if Flash configuration is PY. More... | |
Quantity | duty |
Duty inlet - outlet; fixed if Flash configuration is XH. More... | |
Quantity | alfa |
Molar vapor fraction; fixed if Flash configuration is XA. More... | |
Quantity | deltas |
Entropy power inlet - outlet; fixed if Flash configuration is XS. More... | |
Quantity | deltaP |
Pressure drop; fixed if Flash configuration is DY. More... | |
Quantity | flowcoefficient |
Flow coefficient; fixed if Flash configuration is KY. More... | |
Quantity | deltaPMax |
maximum allowable pressure drop More... | |
Quantity | beta |
Fraction of deltaPMax when the pressure drop limitation logic will start acting. More... | |
String | option |
Flash configuration, composed of a pressure option and a Flash option: {D,P,K}{T,H,S,A}. More... | |
String | reactionMode |
std::vector< String > | embeddedTypeReactions |
type of the embedded reactions More... | |
Integer | nReactions |
Number of reactions. More... | |
Integer | nreactionEquilibriums |
Number of equilibrium reactions. More... | |
Integer | NITER |
Number of iterations. More... | |
std::vector< Reaction * > | reactions |
reactions[] More... | |
std::vector < ReactionEquilibrium * > | reactionEquilibriums |
reactionEquilibriums[] More... | |
![]() | |
int | verbosityLocal |
Static Public Attributes | |
static const std::string | type_ |
Additional Inherited Members | |
![]() | |
enum | PortLocation { north, south, east, west } |
![]() | |
enum | SolutionMode { Null = 0, sequential, simultaneous, singlePassSimultaneous } |
![]() | |
void | inletRequired (int i) |
![]() | |
void | registerSynonym (std::string alias, std::string port) |
void | clearBalance (void) |
used in calculateBalance, zeroes out the required variables More... | |
![]() | |
void | printSvgXlink (std::ostream &svg, const std::string &link, double width, double height) |
void | addComponentVectorVariable (std::vector< Quantity > &variable, const std::string &tag, const std::string &description, Quantity::ValueType value) |
template<typename T > | |
void | addSubObjects (int verbosityFile, Libpf::User::Defaults defaults, Persistency *persistency, int count, const std::string &optionKey, const std::string &typeKey, const std::string &tagKey, const std::string &description, std::vector< T * > &vector) |
![]() | |
int | retrieveInteger (const Libpf::User::Defaults &defaults, uint32_t id, Persistency *persistency, std::string tag, int min, int max, int def=-1) |
std::string | retrieveString (const Libpf::User::Defaults &defaults, uint32_t id, Persistency *persistency, std::string tag, const std::string def) |
template<class T > | |
void | addVariable (T &variable) |
template<class T > | |
void | addVectorVariable (std::vector< T > &variable, const std::string &tag, const std::string &description, uint32_t size, typename T::ValueType value) |
Object (const Object &other) | |
copy constructor More... | |
Object (Object &&other) | |
move constructor More... | |
Object & | operator= (const Object &) |
copy assignment operator More... | |
Object & | operator= (Object &&other) |
move assignment operator More... | |
![]() | |
int | offset (void) const |
![]() | |
void | setFlash_ (void) |
void | computeReactionConversions_ (void) |
compute Reaction mass balances More... | |
void | estimate_ (void) |
estimate outlet stream and equilibrium reactions if any is present More... | |
![]() | |
void | prepare_ (double *x, Jacobian *J) |
uscales x (unknowns) values from calling function and puts them in x_ Quantities More... | |
void | packResults_ (double *x, double *y, Jacobian *J) |
~ObjectiveNleAd () | |
![]() | |
~ObjectiveNleAuto () | |
![]() | |
~ObjectiveNleInterface () | |
![]() | |
std::vector< EdgeBase * > | inlets_ |
inlet EdgeBase pointer vector More... | |
std::vector< EdgeBase * > | outlets_ |
outlet EdgeBase pointer vector More... | |
![]() | |
std::map< std::string, Integer * > | integers_ |
collection of integer variables More... | |
std::map< std::string, IntegerVector * > | integerVectors_ |
collection of integer variable vectors More... | |
std::map< std::string, Quantity * > | quantities_ |
collection of real variables More... | |
std::map< std::string, QuantityVector * > | quantityVectors_ |
collection of real variable vectors More... | |
std::map< std::string, QuantityMatrix * > | quantityMatrices_ |
collection of real variable matrices More... | |
std::map< std::string, String * > | strings_ |
collection of string variables More... | |
std::map< std::string, StringVector * > | stringVectors_ |
collection of string variable vectors More... | |
![]() | |
std::map< std::string, std::unique_ptr< Node > > | children_ |
the collection of direct descendants More... | |
![]() | |
Persistent * | parent_ |
pointer to the parent Persistent; set to this by the constructor if Item is self-standing or a root Persistent of a tree More... | |
![]() | |
int | verbosityInstance |
![]() | |
Stream * | myout_ |
PhaseMNProperties * | myout_Tphase_MNP |
PhaseM * | myout_TPhaseSimplephase |
SolverNle | NLEphr_ |
![]() | |
bool | set_ |
true if setup_of has already been called More... | |
![]() | |
std::vector< Scaler > | scaler_ |
provide scaling and unscaling More... | |
![]() | |
std::vector< Value > | residuals |
Residuals. More... | |
Detailed Description
Vertex model to represent an (optionally) reactive Flash drum with many inlets and one outlet.
Has an one or more inlets, and one outlet.
Options:
- nReactions Number of reactions, valid range 0..INT_MAX, defaults to 0
#include <libpf/units/FlashDrum.h>
- Remarks
- Warning
- Thread safe:
- Extendable:
- Platform dependencies:
Constructor & Destructor Documentation
FlashDrum::FlashDrum | ( | Libpf::User::Defaults | defaults, |
uint32_t | id = 0 , |
||
Persistency * | persistency = nullptr , |
||
Persistent * | parent = nullptr , |
||
Persistent * | root = nullptr |
||
) |
FlashDrum::~FlashDrum | ( | void | ) |
Member Function Documentation
|
virtual |
|
virtual |
return should-be net energy balance of unit (inlet-outlet), defaults to zero and must be overridden if required
Reimplemented from VertexBase.
Reimplemented in Pump.
|
virtual |
Calculate the Model
- Parameters
-
simultaneous true if the Model is to be solved during a simultaneous resolution of a larger set of equations level used for indenting
Implements Calculatable.
Reimplemented in Pipe, HeatTransfer, and Pump.
|
virtual |
estimates hidden, non-persistent unknowns from the current results
Implements Model.
|
virtual |
performs initializations required immediately before solution
Implements Model.
Reimplemented in Pipe, HeatTransfer, and Pump.
|
virtual |
setup and resize appropriately internal vectors; must be provided by implementations
Implements ObjectiveNleAdVertex.
|
inlinevirtual |
- Returns
- the C++ name of the class the instance belongs to
- Note
- it is the responsibility of the caller to not access this reference after the lifecycle of the Item
Implements Item.
Reimplemented in Pipe, HeatTransfer, and Pump.
Member Data Documentation
Quantity FlashDrum::Tavg |
Mass-weighted average inlet temperature.
|
static |
The documentation for this class was generated from the following file: